Shoe Molding Installation With and Without Nails
Similar to most carpentry jobs shoe molding installation can be done with a hammer and nails. A nail gun can take their place, of course, and can make it easier when placing shoe molding around doors and inside tight corners. The options don’t stop there, so read on to find out how to take care of shoe molding installation with and without the use of nails.
Materials That You Will Need :
- Caulk Gun
- Miter Saw
- Glue for Construction Purposes
- Sand Paper
- X-Acto Knife
- Liquid Nails
- Measuring Tape
- Nail Gun
1. Prep before Installing the Molding
- The first thing you need to do is make sure the molding is clean before you start. Also clean around the area where you will be installing it. It is a good idea to have the molding already primed and painted, so if that’s what you want you should do so ahead of time.
- A lightweight molding is a good option if you are using construction glue and not using nails.
2. Measuring and Cutting Shoe Molding to Fit
- With your measuring tape, measure the area that you will be installing the shoe molding. Put the molding flat against the miter saw, making sure it is face up, and cut it to the measured length.
- You may need to sand the edges for smoother shoe molding.
- Dry fit the shoe molding and determine if it will fit correctly. Put it against the wall with the butt and cut pieces up to it to make sure it will all fit into place.
3. No Nail Shoe Molding Installation
- Pour the liquid nails into the caulk gun cartridge. Cut the tip about 1/4″. Puncture the seal of the canister.
- On a clean work area, lay down the shoe molding face down and apply a bead of liquid nails in a zig-zag pattern so it covers the length of the molding.
- Put the molding up to the wall with the adhesive side facing the wall and press firmly into place. Carefully make sure everything is lined up.
4. “Traditional” Shoe Molding Installation
- Use either your nail gun or your hammer and nails to secure the shoe molding firmly to the wall. Evenly space them apart, they should be no closer than 9 inches to each other.
- If you’re wondering “Which nails should I use for shoe molding?” the answer is 2″ brad nails for the nail gun. Try to find smaller finishing nails for your hammer so they’re not so noticeable on the shoe molding.
With this information, shoe molding installation will be an easy project for you to complete. But if you would like some more assistance, why not call Home Painters Toronto? They’re standing by waiting to serve you today! Call us NOW at 416-494-9095 or [email protected].